Steel Vapor Scrubber Systems

Eliminator 250 Vapor Scrubber Unit

The E250 is a 'forced induction' vapor scrubber unit. This unit is a smaller version of our popular E550 vapor scrubber unit. The main shell and internals of this unit are made from 304 stainless steel for corrosion resistance and longevity. These units use the force of the vapors through the unit to come in contact with our specialized stainless distributors which are located inside of the unit. The primary distributor creates a 360 degree pattern for the vapors to radiate out to the main distributor. The main distributor has enormous surface area yet provides almost no back-pressure inside of the unit. It is here where liquid-to-vapor cohesion takes place. This transfer zone yields extremely high removal efficiencies (high as 98%) for compounds such as hydrocarbons.

  • Removal efficiencies as high as 98.5% for hydrocarbons such as gasoline!
  • Uses Vapor Tech’s economically priced Bio Scrub X chemical media to absorb hydrocarbons.
  • Excellent for vacuum truck emissions & tank venting operations.
  • Includes check valve, sample ports.
  • Requires no utilities!
  • Excellent for remote locations.
  • Using other scrubbing solutions, unit able to scrub a host of other vapors.

Unit Footprint 55.5” x 41”
Unit Height 86"
Vapor Inlet Size & Type 4” Flange
Vapor Outlet Size & Type 4” Flange
Typical Chemical Volume 75 gal (minimum) / 100 gal (max)
Maximum Airflow 250 CFM
Maximum Pressure 5 PSI
Maximum Vacuum 50” of W.C.
Sample Ports One per suction and discharge (vapor)
Utilities Required None
Pressure Drop Across Unit 1.3 PSI (36” of water) at 250 CFM

Hydrocarbons Bio-Scrub X
H2S Enviro-Scrub VT
H2S and Hydrocarbons BSX50-EVT6
Vinyl Acetate VAMSOL 40

Related Products

Check out these other great Steel Vapor Scrubber Systems products

Eliminator 550-N1K Scrubber System

The E550-N1K is a complete trailer-mounted vapor scrubber unit designed for vapor flows up to 500 CFM.

Eliminator 5500 Scrubber System

The Eliminator 5500 scrubber unit is designed to treat hydrocarbon and other vapors from Air-Movers and GapVac units which typically have exhaust streams around 5500 CFM.

Our Distributors

Interested in purchasing or leasing our scrubbing equipment and specialty chemicals? Contact one of our global distributors


Looking for Distributors in Asia!

Contact us if you would be interested in being an Asian Distributor.

  • Phone409-316-0173

Middle East

Looking for Distributors in the Middle East!

Contact us if you would like to be a distributor.

  • Phone409-316-0173


Vapor Technologies

Edmonton, Alberta

  • Phone780-782-7654
  • Fax281-754-4876

United States

Looking for Regional Distributors!

Contact us if you are interested in becoming a Distributor of our unique products.

  • Phone409-316-0173
To top