Steel Vapor Scrubber Systems
E6500-R3K High Volume Scrubber
Trailer mounted wet scrubber followed by twin 3000# Radial Carbon Beds. Designed for flows up to 6500 CFM with low pressure drop. Excellent for tank venting, hydroexcavation vapor control, airmover exhaust, GAP Vac exhaust and many other applications.
- Hydro-Excavation Vapor Control
- Gap-Vac Exhaust Vapor Control
- Tank Venting
- Pipeline Venting
- Vacuum Truck Vapor Control
| Maximum Flow Rate (CFM) | 6500 |
| Minimum Flow Rate (CFM) | 250 |
| Maximum Pressure (PSI) | 5 |
| Maximum Vacuum (Hg) | Not designed for vacuum |
| Maximum Temperature (°F) | 180°F |
| Pressure Drop Across System (@ 4500 CFM) | Approximately 45” of water |
| Minimum Scrubber Liquid Level (Gallons) | 825 |
| Maximum Scrubber Liquid Level (Gallons) | 1450 |
| R3K Radial Carbon Bed Volume (Pounds) | 3000 |
| Unit Footprint (Trailer) | 29’L x 8’W |
| Unit Height (Feet) | 13’ |
| Vapor Inlet (Inch & Type) | 10” 150# Flange |
| Vapor Outlet (Inch & Type) | 10” 150# Flange |
| PRV | Weighted Pallets (Set for 5 PSI) |
| Trailer | Dual Tandem (Dual 10K Axles) |
| Removal Efficiencies for Liquid Scrubber | As High as 98% with Fresh Chemical Media |
| Total System Removal Efficiency (with Carbon Polishing) | 99.999% (Until Breakthrough for Most Compatible Vapors) |
| Internal Distributors and Media (Scrubber & Radials) | Stainless Steel |
Related Products
Check out these other great Steel Vapor Scrubber Systems products
Eliminator 5500 Scrubber System
The Eliminator 5500 scrubber unit is designed to treat hydrocarbon and other vapors from Air-Movers and GapVac units which typically have exhaust streams around 5500 CFM.
SST-20 Vapor Scrubber
Dual column stainless steel scrubber for vapor flows up to 750 CFM.