Carbon Filtration Equipment

Vapor Tech manufactures a full line of specialty carbon filtration equipment. From our industry leading NOVAC carbon beds to our high-flow Radial carbon beds, we have the equipment to get you in compliance!

NOVAC 200 Carbon Vessel

The NOVAC 200 is a direct replacement for standard 200# carbon drum adsorbers. However, this unit allows you to change out carbon within minutes yourself! The NOVAC 200 has a bottom dump valve which allows you to empty spent carbon in just 5 minutes. Furthermore, it has a temperature gauge as well as our liquid quench system which allow you to inject water into the unit if it becomes hot. Bi-directional fork slots make this unit very easy to move around as well. Holds up to 200# of regular carbon media.

NOVAC 750 Carbon Vessel

The NOVAC 750 is a continuation of our popular NOVAC series carbon adsorbers. Designed for applications within the 20-550 CFM flow range. Includes temperature gauge and water/nitrogen purge system which greatly increases the safety of the unit and limits chance of thermal event or bed fire. Unit holds approximately 750 pounds of activated carbon media. The NOVAC style units are unique in that they do not require vacuum service to unload spent media. When media is spent, simply raise unit into the air with forklift, place a carbon sack under the discharge valve, and then open the bottom discharge valve. Save valuable time and resources! Never wait for a vacuum service or cyclone again! Available for rental or purchase.

NOVAC 1000 Carbon Vessel

The NOVAC 1000 is a one-of-a-kind carbon vessel. This unit holds 1,000# of GAC and is good for airflows up to 1000 CFM. What makes it unique is the fact that is does not require spent carbon removal service such as a cyclone or vacuum truck to remove spent carbon. When your carbon is spent simply lift the NOVAC 1000 with a forklift into the air, attach a fresh carbon sack to the bag hooks under the unit, and then open the bottom lever valve to allow the carbon to flow out of the unit. You can remove spent carbon and add fresh carbon back into unit within 15 minutes. Not only are these units easy to service, but they are the safest carbon beds on the market, hands down. Each NOVAC 1000 has dual temperature gauges with deep wells. These give immediate core temperature readouts and can signify if you have a thermal issue. Each unit also has an emergency liquid purge system. If temperatures do get out of hand, you can attach water to the valve located on the unit and open it to saturate the entire unit with fresh water. This will greatly help avoid a bed fire. Lastly, all NOVAC 1000 units have ladders which safely allow access to the top of the unit. Units available for rental or purchase.

NOVAC 2000 CARBON VESSEL

The NOVAC 2000 is a one-of-a-kind carbon vessel. This unit holds 2000# of GAC and is good for airflows up to 1500 CFM. What makes it unique is the fact that is does not require spent carbon removal service such as a cyclone or vacuum truck to remove spent carbon. When your carbon is spent simply lift the NOVAC 2000 with a forklift into the air, attach a fresh carbon sack to the bag hooks under the unit, and then open the bottom lever valve to allow the carbon to flow out of the unit. You can remove spent carbon and add fresh carbon back into unit within 15 minutes. Not only are these units easy to service, but they are the safest carbon beds on the market, hands down. Each NOVAC 2000 has dual temperature gauges with deep wells. These give immediate core temperature readouts and can signify if you have a thermal issue. Each unit also has an emergency liquid purge system. If temperatures do get out of hand, you can attach water to the valve located on the unit and open it to saturate the entire unit with fresh water. This will greatly help avoid a bed fire. Lastly, all NOVAC 2000 units have ladders which safely allow access to the top of the unit. Units available for rental or purchase.

R4K Radial Carbon Vessel

Vapor Tech's R4K radial carbon bed adsorber is designed for airflow rates up to 10,000 CFM with low pressure drop (when compared to traditional linear beds). Unit holds 4000# of vapor phase carbon media. This adsorber includes Vapor Tech's one-of-a-kind safety features such as multiple temperature gauges as well as liquid/nitrogen purge system. Top easily removes for removal and loading of carbon media. Large internal manways provide easy access to internals. Main internals are 304 stainless steel. There is no other radial carbon bed on the market like this unit! Comparable systems for this flowrate are typically 8'W x 22'L and hold 10,000# of carbon. This unit is excellent for use in areas where space is limited. Large fork slots make the unit easy to move around. Available for sale or for rental.

1KR Carbon Vessel

The 1KR carbon vessel is a standard vapor phase carbon vessel which holds 1000# of vapor phase carbon media. This unit is equipped with temperature gauge and a nitrogen purge inlet line. This unit also has bottom clean-out for particulate as well as a large 20" manway located on the top of the vessel. Designed for vapor flows up to 1000 CFM.

VP-55 Carbon Adsorber

Our standard, 55 gallon drum size carbon adsorber. Heavy duty (DOT rated) drums epoxy lined (internally and externally). Rated for vapor flows up to 120 c.f.m. Excellent for removal of hydrocarbon and organic vapors. Air operated venturi or electric blower available as an option. Contains approximately 200 pounds of granular activated carbon media (GAC). Carbon has the unique ability to remove many types of hazardous and odorous compounds from the air. Overall efficiency on most hydrocarbons is 99.9%+. Not for use on vapor streams that contain aldehydes or ketones as there is an elevated fire risk.

VP55A Carbon Adsorber for Ammonia

The VP55A carbon adsorber is designed for vapor phase flows up to 120 CFM. A specialized acid impregnated media (400 pounds) specifically targets ammonia and amines. Removal efficiency as high as 99.9%. Available in larger sizes as well.

VP55D Carbon Adsorber for H2S

The VP55D carbon adsorber is designed to convert H2S and other reduced sulfur compounds into elemental sulfur. This product has the remarkable ability to adsorb up to 30% by weight with H2S versus 4% with regular activated carbon. Designed for airflows up to 120 CFM. Heavy duty, DOT rated drums are epoxy lined (internal and external). Contains approximately 175 pounds of Darco H2S carbon media. Options such as air or electric blower available.

Carbon Filtration Equipment

Our Distributors